Dear Customer,
Congratulations on purchasing this Klarstein eqipment. Please read this manual carefully and take
care of the following hints on installation and use to avoid technical damages. Any failure caused by
ignoring the mentioned items and cautions mentioned in the operation and installation instructions
are not covered by our warranty and any liability.
Contents
Technical Data 5
Safety Instructions 5
Product Description 6
Getting Started 6
Use and Operation 7
Useful Tips 7
Cleaning and Care 7
Environment Concerns 7
Declaration of Conformity 7
Technical Data
Item number
10027723, 10028927
Power supply
220-240 V ~ 50/60 Hz
Power consumtion
300 W
Bottles capacity
0.4/0.6 litres
Jug capacity
0.8 litres
Safety Instructions
• Always disconnect the appliance from the supply if it is left unattended and before assembling,
disassembling or cleaning.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• Appliances shall be potential injury from misuse.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards involved.
• Children shall not play with the appliance.
• This blender is intended only for domestic use.
•
CAUTION: Ensure that the blender is switched off before removing it from the stand.
• Make sure that the voltage shown on the rating plate corresponds with that of the mains supply.
The rating plate can be found on the bottom of the motor block. The blender is only to be connec-
ted to an AC supply (~). The mingotor must always be switch off before the blender is connected
with the mains supply.
• Care is needed when handling cutting blades, especially when removing the blade from the bowl,
emptying the bowl and during cleaning.
• This blender only operates if the blending unit has been inserted into the motor block.
• Before switching on the blender, make sure that the blending unit has been assembled correctly
and has been inserted into the motor block with the lid attached.
• The blender is not to be operated with an empty blending unit (i.e. without solid or liquid food-
stuff).
• Allow any hot liquids to cool to a lukewarm temperature before you pour them into the blending unit.
• This electrical device complies with the relevant safety regulations.
• Repairs are only to be carried out by an authorized electrician. Improperly carried out repairs can
lead to accidents and injury to the user.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard
4
5
