3). Clean the Group Head and Steam Nozzle. Make sure they are not blocked.
4). Remove the filter and clear away the coffee powder inside.
5). Clear away the waste water in the Drip Tray (16)
(Picture 5) and clean the Cup Storage (15).
Attention:
You need to turn the Drain Pipe when removing the Drip Tray. After cleaning, you must reset
the Drain Pipe and make sure the orifice faces to the Drip Tray, in case that hot water sprays to the place
other than the Drip Tray when brewing coffee.
6). Empty the remaining water in the Water Tank (3). Add fresh purified water during daily use.
7). Wash the coffee cup and wipe it with dry cloth. Then put it on the Cup Holder (8) for warming.
8). Clean the internal piping of the machine. Please refer to Point 7 of the Measures Before Use.
2)
Periodical Maintenance (Every 10 Days)
1)
Put the Holeless Cleaning Cup (12-3) into the Portafilter (12), add some cleaning powder
and insert it into the Group Head (19) of the machine.
2). Move the Espresso/Steam Heating Switch (10) to [ ]
position and turn on the Steam lever (6).
Then move the Espresso/Steam Heating Switch (10) to the central position after around 30
seconds. Do this several times without taking off the Portafilter (12).
3). Take off the Portafilter (12), Holeless Cleaning Cup (12-3) and Filter. Then clean them with clean
water.
4). Before making coffee or steam for people, please make a coffee or steam and pour them out, in
order to get rid of the remain smell of the cleaning powder.
3. Periodical Descaling (Every 30 Days)
1). Make 1L of descaling solution, using the descaling media specially for coffee machine and dilute
it according to its diluted percentage, or using citric acid (molecular formula:
C6H8O7-H2O) and dilute it as 1:300 dilution. Then [ ] pour the solution into the WaterTank.
2). Insert the Portafilter (12) to the Group Head (19) and fasten it. Move the Espresso/Steam Heating
Switch (10) to [ ] position. Hot water comes out from the Spout (14).
Move the Espresso/Steam Heating Switch (10) to the central position to stop after about five to
six cups of water flow out.
3). Remove the Portafilter (12) and put in the Holeless Cleaning Cup (12-3). Then insert it into the
Group Head and turn right as far as possible. Move the Espresso/Steam Heating Switch (10) to
[ ] position and turn on the Steam Lever (6). After 30 seconds, move the Espresso/Steam
Heating Switch (10) to the central position. Do this several times without taking off the Portafilter
(12). Turn off the Steam Lever (6) when finish.
4). Take off the Portafilter (12), Holeless Cleaning Cup (12-3) and Filter. Then clean them with clean
water.
5). Clear up the remaining solution in the Water Tank (3) and replace with purified water. Repeat
steps 2 and 3.
Abnormal Situations Treatment
No power,
No heating
1. Check whether the power fit for the
requirement of this machine.
2. Check whether the cord is destroyed.
3. Check whether the Power Switch is on
the [I] position.
4. Check the situation of Power Indicator
Light and Heating Indicator Light.
1. Use the power fit for the requirement
of this machine.
2.Change the cord (handled by local
supplier)
3.Move the Power Switch to[I] position.
4. If Power Indictor Light is off, or Power
Indictor Light is on but Heating Indicator
Light is always off, please contact the
local supplier for maintenance.
14
