8
Location
• Install refrigerator in a convenient location away from extreme heat
and cold. Allow sufficient clearance between the refrigerator and side
wall so the door will open without obstruction. Refrigerator is not de-
signed for recessed installation.
• Select a space with strong level floor.
• Allow 2 inches (5cm) of space between the refrigerator’s side & wall
and 4 inches (10cm) between back & the wall.
Cleaning and Care
• Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
• Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing, use silicon
wax.
• Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and dry. Wash
interior with baking soda solution (3 tablespoons to I liter of water) or warm sudsy water, rinse and dry.
• Magnetic Door Seals: Wash with warm sudsy water.
• The Finishing Touch: Replace all parts and return thermostat dial to desired setting.
Troubleshooting
When the refrigerator is not in use for a prolonged period of time:
• Remove the power plug from the power supply.
• Remove all contents from the refrigerator.
• Dry the interior and leave the door open for a few days.
When you wish to move the refrigerator:
• Secure all movable parts and contents. (Package them separately if necessary.)
• Transport the refrigerator only in an upright position.
If the refrigerator seems too warm inside:
• Check that the door has not been opened too frequently or for a long period.
• Check that the interior circulation is not obstructed by having too many goods stored. (The refrigerator is
overloaded)
• Did you store anything hot, without first cooling it to room temperature?
• Is there sufficient clearance around all sides and above the refrigerator?
