Fault
Possible cause
Elimination
There is a little juice.
There are too many residues in
the middle ring; or The pushing
rod is pushed violently.
Clean the middle ring; or
Gently push the pushing rod.
The cutter holder is seized.
The cutter holder is wound or
seized by food materials.
Disconnect the power supply,
take out the food materials and
cut them into smaller blocks.
Notes:
The table above introduces the common faults and their cause analysis and elimination methods.
For other faults, contact our customer service department or have the product repaired by a designated
service center of us directly. Do not dismantle or repair the product by yourself.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin, Germany
16
