2. To cancel the FULL GO function, first press the SET button to see “
” displaying on the
screen with the first “F” flashing,then press STOP and after you press the SET button again, the
FULL GO function is canceled.
Tip:
When the FULL GO function is set, the pre-setting function is unavailable.
Space Isolator:
Tip:
You should check code before using the Space Isolator; otherwise it will fail to work.
Steps of code check:
A: Turn off the cleaner, and turn on the Space Isolator (with power indicator on);
B: Keep holding the code check button on the Space Isolator;(Tip: the code check button is inside
the hole, you need to use auxiliary tools when hold the button)
C: Turn on the cleaner;
D: After the cleaner toots 2 or 3 times, release the code check button, then the code check set is
finished successfully.
Note:
If you fail to hear toot 2 or 3 times, twice during the code check, just repeat the above process.
Tip:
Place the space isolator against the wall, or it might be easily moved by the cleaner from side or
back of the space isolator, which would cause the machine cleans the confined area.
Docking Station
Tips:
Before you use the docking station, code check
is required; otherwise it will fail in self-charging.
Steps of code check:
A: Turn off the cleaner;
B:
Keep holding the code check button of the
docking station; (Tip: the code check
button is inside the hole, you need to use
auxiliary tools when hold the button)
C: Turn on the cleaner;
D: After the cleaner toots 2 or 3 times , release the “OK” button, then the code check set is finished
successfully.
Note:
If you fail to hear toot 2 or 3 times, during the code check, just repeat the above process.
Tip:
Place the docking station against the wall, or it might be easily moved by the cleaner from side or
back of the station, which would make the cleaner take longer time to find the docking station for charging.
Signal transmitting
Power switch
Power indicator
Code check button
17
