3. Before charging,turn on the cheaner and
connect the adapter with docking station
make sure the cleaner abut against the
docking station,and connect the auto-
charging electrode well with that of the
docking station.(Refer to Figure 2)
4. Press the CHARGE button on the remote
control or the machine panel and the
cleaner will search the docking station for
charging in a valid scope.(See Figure 3)
5. When the machine is searching for the
docking station, press the CHARGE key on
the machine’s panel or the STOP or
CHARGE key on the remote control, to
stop the cleaner searching for the docking
station immediately.
6. During charging, the indicator blinks.
When it stops blinking, it indicates the
battery is fully charged.
Automatic Charging:
In case of low battery during cleaning,the
cleaner would toot for 10 times and it auto-
matically searches for the docking station for
charging with the CHARGE button light on.
Tip:
When finish cleaning, the temperature of
the battery is a little high, and its charging
time will be longer.
Remote Control:
Control Panel of Remote Control:
Weekdays
Emission signal
Pre-set to select all or turn
off charging indicators
Setting of current time
Speed
Stop
Power button
Confirm
Direction buttons
Current time
Pre-set time
Pre-set cleaning
Charge
Automatic cleaning
Spot cleaning
15
