17
10: Cleaning & Maintenance
Periodically and after consistent use, the film & photo scanner should
be cleaned using compressed air canister to remove the dust out from
the internal chamber.
◆
Insert the end of straw from the compressed air into door flap on the
right side so that it opens.
◆
Gently blow out any dust on the inside of the device.
Note:
Compressed air is not included with the device but can be
purchased from an office supply or electronics retailer.
For further cleaning you can use an ordinary cotton swab and a bottle
of lens cleaning fluid
◆
Wet the end of the cotton swab with Lens Cleaning Fluid and insert
into the right side of the device so the door flap opens. Then clean the
entire surface of the glass on the inside of the device with the cotton
swab.
Note:
Cotton swabs and cleaning fluid are not included with the device
but can be purchased from an office supply, photo supply or electronics
retailer.
When not in use please disconnect the film & photo scanner from the
computer and store in a clean, dry and dust-free environment.
