6
Assembly:
• Attach the front and back base supports to the main unit with the washers and screws using the
included hex tool.
•
Use the included wrench to install the foot pedals / hand grips. Note which pedal is on the left and
right side withthe L and R markings.
Mounting the Foot pedals / Hand grips:
•
Place the Mini Cycle on a table or other flat surface high enough to operate comfortably.
Operation
Adjust tension:
Twist the tension valve at the back of the Mini Cycle to increase or decrease the tension.
Replacing the battery:
Lift up the display from the main cycle unit. The battery is attached to the bot
-
tom of the display. The device requires a type AAA battery. Please mind the correct polarity as indicated
inside the battery compartment.
Training Console
T
=
Time
D =
Distance
C
=
Count
T.C =
Steps/minute
CA =
Calories
