46
Connecting the hob to the mains power supply
16. Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard, or a sing-
le-pole circuit breaker.
The method of connection is shown below.
•
If the cable is damaged or needs replacing, this should be done by an after-sales technici
-
an using the proper tools, so as to avoid any accidents.
• The installer must ensure that the correct electrical connection has been made and that
it complies with safety regulations.
• The cable must not be bent or compressed.
•
The cable must be checked regularly and only replaced by a properly qualified person.
• The installer must to use the H05GG-F power cord.
40
1
40
