KKT KOLBE PROFI FREE Series, User Manual

Page: 34 / 44

34
8. Control panel
Control panel
On/off button.
In standby mode, press the key for 0.5 seconds, activate all buttons.
Under the working condition, short press, the motor stops working;
long press close all functions
“wind”key.after turn on the units, short press wind key to adjust motor speed, each
press will change speed once, from "low" to "middle" to "high" and back to "low"
again. At the same the LCD display will also show the column of speed from "low"
to "high".
Lighting:
Press this button to turn on/off the lights.
Setting the clock:
Keep this key in standby mode to start the time setting.
First, the hour ashes.
Set the hour by pressing the buttons
–
and
+
. Press the button again
to set the minutes make and
–
and
+
again using the buttons.
When you nish the time setting, wait either 10 seconds or operate
the button again.
Setting the off imer:
Brie y press the button while the hood is in fan operation,
leads to the following pre-set delay times:
From → 15 minutes → 30 minutes → 45 minutes → 60 minutes → O .
You can use the buttons
–
and
+
to switch between these times.
Quick-off imer (5 minutes):
Press the
–
and
+
buttons for a longer time. The display will ash -
a er 5 minutes, the device switches o . A buzzer sounds.