9
2x ST 4 x 12
Installation
4. Appliance legs
The legs are height adjustable. The top edge of the device
must be flush with the closet. If this is not the case, adjust
the height of the feet. Place a screwdriver in the space provi-
ded (see arrow above figure), and turn as needed to the left
or right. Then screw the feet with two ST 4 x 12 screws on the
bottom of the kitchen cabinet fixed.
5. Air vents
Attach the lower ventilation grille between the two feet, as
shown in the illustration.
6. Seal tape
Now fasten on the left side the sealing strip between the refri
-
gerator and built-in wardrobe to cover the existing gap.
EN
