background image

2

Safety precautions

Intended Use

After transport

!

!

Dispose of the packaging material correctly.

All packaging materials can be recycled.

Plastic parts are marked with the standard internati-

onal abbreviations: (e.g. PS for polystyrene, padding 

material)

This appliance is identified according to the European 

guideline 2012/19/EC on waste electrical and electro

-

nic equipment -WEEE. 

The guideline specifies the framework for an EU-wide 

valid return and re-use of old appliances.

•  The appliance is suitable for cooling food.
•  It is intended for household use.
•  If the device is misused or misused, the manufacturer 

can not be held responsible for any damage.

•  It complies with the relevant safety regulations for 

electrical appliances.

•  The refrigeration circuit is tested for leaks.

•  Before you connect the unit to the mains, leave it to 

stand for at least 12 hours to allow the coolant to coll-

ect in the compressor. Otherwise, the compressor 

may be damaged and cause the unit to fail.

•  Failure to observe the rest period will void the warranty.
• 

Clean  the  device,  especially  the  inside  of  the  device 

 

(refer to the cleaning section).

Remove transport protection:

 

The device as well as parts of the interior equipment are 

protected for transport. Remove all tapes on the right 

and left side of the appliance door. You can eliminate 

any glue residue with a cleaning gas. Also remove all 

adhesive tapes and packaging parts from inside the unit. 

Dispose of the packaging environmentally friendly.

!

This icon indicates a hazardous situation.

You‘ll find it especially with all descriptions of the steps that 

might cause danger to persons arising.
Observe these safety instructions and behave accordingly ca-

reful. Enter these warnings also to other users of the device.

This icon indicates a warning.

You can find it in the description of the steps that must be ob

-

served in order to damage to the unit can be prevented. Please 

include these safety instructions to all device users.

This icon indicates an information.

This symbol indicates useful tips and calls attention to proper 

procedure and behavior. The observance of the notes marked 

with this icon may save you many problems.

Summary of Contents for KG7702









































Reviews: