12
Using the dishwasher
If there is no rinse-aid warning light on the
control panel, you can judge the amount
of rinse-aid by the color of the optical level
indicator „D“ located next to the cap. When
the rinse-aid container is
full, the whole indicator will be dark. As the
rinse aid diminishes, the size of the dark dot
decreases.
Full
3/4 full
1/2 full
1/4 full - Should refill to
eliminate spotting
Empty
rinse aid
indicator
2
1
3.4 Fill the rinse aid dispenser
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, spot and streak free drying.
• This appliance has been designed for the
use of liquid rinse aids.
• The dosage of the rinse aid is on the inside
of the tiltable door, next to the Chamber
of the dosage of dishwasher tablets.
• To make the rinse aid reservoir of acces-
sible, turn the cap counterclockwise, the
cap is thus loosened from the filling ope-
ning
(1)
. Pour slowly the liquid rinse aid
(2)
; the capacity of the reservoir is about
110 ml
• You should pour in the rinse aid slowly un-
til the level indicator is completely black.
• You should not overfill the reservoir, it
could cause the selected wash program
for excessive foaming. Wipe off the re-
mains of the rinse aid with a damp cloth.
• Unscrew the cap clockwise back again
until it locks into position
(3)
.
• If the control indicator „Rinse aid“ on the
control panel on, it is necessary to fill the
detergent reservoir again.
• Important:
Even if you use detergent ta-
blets 3 in 1, it is necessary to constantly
refill rinse aid into the reservoir.
