11
Using the dishwasher
Important Information
The next refilling of salt in a dishwasher refilling of 500 ml of wa-
ter in the reservoir of the water softener is not necessary.
EN
3.3 Set up the water softener
The water softener has to be set manually. This feature is built in
your device to remove minerals and salt from the water, which
would have a detrimental or adverse effect on the operation of the
appliance. The higher the amount of these particles, the harder the
water is. The softener should be adjusted according to the hardness
of the water in your area of living. Inform yourself at your local wa-
ter authority about these values.
Setting:
• Unscrew the cap from the salt container.
• There is a ring on the container with an arrow
on it (see figure to the side). The ring must be
rotated towards the „+“ sign and refill the con-
tainer with salt.
• Close the cap and the appliance door.
• Turn the appliance on.
• Hold down -button and press -button for
about 5 seconds. The buzzer rings one time and
H4 appears on the screen (standard value).
• To change the value according to the table,
press -button till you have reached it.
• Press to store your setting.
°Clark Range
Mmol/l
Value
0–8
soft
0–1.1
H0
9–10
soft
1.2–1.4
H1
11–12
medium 1.5–1.8
H2
13–15
medium 1.9–2.1
H3
16–20
medium 2.2–2.9
H4
21–26
hard
3.0–3.7
H5
27–38
hard
3.8–5.4
H6
39–62
hard
5.5–8.9
H7
