Gewerbliches inhaltliches Kopieren verboten!
On installation, the minimum distance
between the hob and the hood must be
exactly complied with see chapter .
“Installation data“ and follow the num-
bering of the steps and the additional
instructions. ‘xecution with air exhaus-
ted outdoors A- see also the installation
data . The vapours are extracted via an
air exhaust hose ixed to the connector
ring.
The diameter of the exhaust air hose
must conform to that of the connector
ring. If a smoke non-return valve is used
or is planned, check whether it can open
and close freely ater the installation of
the exhaust air hose. The extractor hood
can be equipped with one top or two
top and back extractor openings.
The hood is normally initially itted out
for use of the top extractor opening, as
an extractor hood.
Openings not required are itted with a
plastic cover. This plastic cover can be
easily removed by turning counterclock-
wise and optionally itted to another ope-
ning which is not required.
. Installation data /
dimensions
Minimum distance from the lower edge of
the hood body
to ceramic and cast cooking hobs
cm.
to gas hob
cm.
to hobs with coal/oil/wood iring
cm.
. Installation
Installation
!
Gewerbliches inhaltliches Kopieren verboten!
