12
Programming
First use
Memory function
P
Select a heating mode
Thermometer-Icon
Express cooking
The oven should be thoroughly cleaned first. The oven for
about 20 minutes at 200 degrees heat up (Procedure: See
below); in this manner all the fatty manufacturing residues
are eliminated, which could cause bad odors during the
baking.
Important:
The power supply must be switched off as a safety
precaution before cleaning the oven. For cleaning,
any acid or alkaline substance may be used (such
as lemon juice, vinegar, salt, etc.). Chlorine based
products, acids or abrasives are also to be avoided,
this is especially to pay attention for the cleaning of
enamelled walls.
For the first time or after a power failure it is neccessary
to set the built-in clock of the oven. Without set time
operation is not possible! After a power failure or during
initial start-time, an indicator flashes.
Set time of day
• Setting the time:
Press the button "clock functions" until the clock icon
flashes. Use the "plus" and "minus" buttons to set the cor-
rect time. 5 seconds after the last change the set time value
lights up constantly.
→ The time is confirmed
. The oven is now ready for use.
Notes
• In an interruption of the power circuit,
the clock is reset to 0.
With this function, you can store a frequently used mode
including temperature setting and time settings.
Set mode, desired temperature and program, if you want the
electronic timer.
• To save the complete setting, press the "memory" (P =
preset) for 2 secons until you hear a beep. The setting is
now stored.
• You can overwrite the memory at any time and any number
of times, ie be occupied with a new configuration.
• As long as you save a new setting, the memory contents
will remain available at all times.
To access the saved setting, proceed as following:
• Turn on the oven with the main button.
• Press the and keys so long until desired mode is
reached (see the icon for the heating left on the LED dis-
play).
• At the same time you will also see the set default tempera-
ture (180 ° C) to the right of the function mode.
• These can now be set according to your own ideas (with
the
+
and
–
keys, in 5 ° C increments). Five seconds after the
last change is either the proposed or the temperature you
set and the device starts to work (warm-up).
The operating mode can be changed any time during
operation by pressing the and keys. The temperature
you can adjust by the two buttons
+
and
–
keys.
The shining "thermometer symbol" indicates that the oven
is heating up to the set temperature. The indicator (black
"filling") indicates the Aufheizfortschritt. Once the icon is
"filled", the oven is finished preheating. If the device needs
to reheat, you will see that if the filling something disappears
from the top again.
Note:
This function only works when the oven is empty.
Once you have selected an appropriate mode, you can get
the empty oven by pressing the button very quickly to the
desired temperature.
The "rising thermometer" indicates that the oven heats up
with a higher energy use very quickly. After the rapid heating
is finished, the oven operates again according to the selected
mode. Now you can also bring the food in the perfect pre-
heated oven. The cooking process begins immediately, the
cooking time is thus significantly reduced.
!
