34
Using the appliance
Operation
Initial switch-on
When the oven is connected to the power supply for the
first time, a beep sounds and the display shows „12.30“
with the dot flashing (time setting mode).
To be able to use the oven, you must first set the current
time of day.
Setting the time of day
To set the time, the oven must be in the time setting mode,
which is activated automatically after connection to the pow
-
er supply. For manual activation, press and hold the and keys
and for more than 3 seconds.
• Use the and keys to set the current hour.
• Now press
to confirm.
• Use the and keys again to set the current minute.
•
Confirm the setting with the
key.
Use of the oven
Note:
We recommend that you first run the oven at 200
degrees for 30 minutes to remove residues (See chapter of
turning on the the appliance).
• In standby mode, press and hold the key for more
than 3 seconds to activate manual mode. The
icon is
displayed (cooking process does not start yet).
• Use the function selector knob to set the desired heating
mode and the temperature selector knob to set the desired
oven temperature. The cooking process is started.
• With the
key you can set the time mode.
• If you select an automatic mode (duration / end of
cooking time / fully automatic), the oven switches to
standby mode automatically when the cooking process
is complete.
• If you use the manual mode or the alarm function ,
the selector knobs must be turned to zero position to
stop the cooking process. To put the appliance in standby
mode, press and hold the and keys for more than
3 seconds.
Time modes
• Select the desired time mode by pressing the key
several times if necessary
.
The sequence is as follows:
• Manual mode
• Alarm function
• Cooking duration (dur); semi-automatic
• End of cooking time (End); halbautomatisch
• alternatively, if a cooking duration (dur) has been set:
Cooking du End of cooking time (dur + End);
fully automatic
Manual mode
The cooking time must be monitored by yourself.
• Select the manual mode by pressing the key .
The current time and the
icon are displayed.
• Set the desired heating mode and temperature with the
appropriate knobs.
The cooking process then starts immediately.
Note:
To make sure that you have not forgotten to switch
off the oven, the display starts flashing after
5 hours
as a
warning and after
10 hours
the oven automatically switches
to standby mode.
•
If the display is flashing, press either any key to continue
the cooking process, or press and hold the and keys
for more than 3 seconds to switch to standby mode.
Alarm function
When activated, a beep signal sounds after a specified period
of time. The cooking process remains unaffected.
• Set the desired heating mode and temperature with the
appropriate knobs.
• Use the key to set the alarm function .
• Use the and keys to set the desired time period for
the alarm countdown.
• Press the
key to confirm the setting.
The continuous display of the icon indicates that the
alarm has been activated.
• When the set time has expired, a beep sounds and the
icon flashes.
• To stop the alarm, press any key for less than 3 seconds.
The icon disappears from the display.
Note that the timer has no influence on the
cooking process, but serves only as a warning /
reminder.
Cooking duration semi-automatic mode
The appliance stops cooking automatically after a set period
of time. The maximum cooking time that can be set is 10
hours.
• Place your food in the oven and set the desired heating
mode and temperature with the appropriate knobs.
• Press the key
repeatedly until „dur“ is displayed.
• Use the and keys to set the desired cooking duration.
•
Confirm the setting with the
key.
• The current time and the and
icons are displayed
and the cooking process starts.
Summary of Contents for BO8810SS
Page 22: ......
Page 23: ...EN User s manual for your built in electric oven Model BO8810SS Version 1 0 200518...
Page 43: ......