Screw the tripod in the screw thread socket on the bottom of battery
compartment tightly(see illustration)
-16-
-17-
Plug one side of charger's cable
connector into the DC socket of
receiver, another side into the AC
power, the red indicator light and
charging is started. The indicator
turns green when power is full.
3.4 Connect the power cable to the transmitter and socket of boat power.
When you first use the Fish Finder you will need to installing the batteries.
Slide the Battery Door, and insert 4 "AA" batteries to the battery
compartment.
Be certain to align the batteries as per the diagram within the battery
compartment.
Plug the antenna into the socket on the back of display tightly(see
illustration)
4.4 Assembling the tripod(tripod is optional)
5 Charge the battery of receiver
4.3 Connecting the Power Cable
Plug the power cable connector into the socket on the back of the display
tightly and another side to the battery compartment.
Warning!!! The chargers are different for transmitter and receiver.
Correct using must be requested according to the instruction on
the charger and this guide, otherwise the damage will be caused!
4.2 Assembling thr antenna
4 Assembling the receiver
4.1 Installing the batteries
Plug into
Plug into
Screw tightly
Plug into
