19
Troubleshooting
Symptoms
Likely Causes
Remedies
Controller beeping
constantly.
AAA batteries in con-
troller low voltage.
Replace with fresh AAA
batteries. See page 9.
KiwiQuad banks to one
direction when hover-
ing without user input.
Gyrometer calibration
required.
Place KiwiQuad on flat
surface and perform a
gyrometer calibration.
See page 13.
Video break-up during
flight.
Device interference.
Interference could
cause video breakup if
another device is using
the same frequency.
Set a new frequency on
the video module. See
page 8.
Dense obstacle inter-
ference or distance too
far.
For best results, fly in
an open area free from
dense objects such as
walls and floors. See
page 8 for more infor-
mation.
KiwiQuad loses signal
during flight or motors
stop spinning and falls.
LEDs are blinking.
Flight controller has
entered a failsafe
state and shutdown all
motors to prevent a fly-
away situation.
Distance from control-
ler too far or too much
attenuation from inter-
ference. Ensure you
have line of sight with
your drone while flying.
Do not fly near moun-
tains or large hills.
Battery voltage too low. To protect the battery
from over-discharging,
the flight controller will
shutdown if a very low
voltage is detected.
