www.KiwiLighting.com
BY-CON-DMX300
https://www.kiwilighting.com/dmx300-high-voltage-led-controller-common-anode-3-channel-2a-ch
Page 4 of 6
15
RB CHANGE
RB jumpy changing
16
GB CHANGE
GB jumpy changing
17
WHITE CHANGE
White stroboflash
18
COLOR SMOOTH
Seven color gradual changing
19
4 COLOR SMOOTH
Four color gradual changing
20
RG SMOOTH
RG gradual changing
21
RB SMOOTH
RB gradual changing
22
GB SMOOTH
GB gradual changing
23
COLOR GRADUAL
Seven color fade in and out
24
RGB GRADUAL
Three color fade in and out
25
WHITE GRADUAL
White fade in and out
26
RG GRADUAL
RG fade in and out
27
RB GRADUAL
RB fade in and out
28
GB GRADUAL
GB fade in and out
29
R GRADUAL
R fade in and out
30
G GRADUAL
G fade in and out
31
B GRADUAL
B fade in and out
32
ADJUST MODE
0-255 level adjusted color
33
AUTO PROGRAM
Auto operation selecting result of changing
34
DMX512 MODE
DMX512 control order
35
DMX512 DECODER
DMX512 decoder
3. Press PARA to adjust in turn: (1
－
8 is static state, do not have adjust function)
No.
Parameters display
Instruction
Maximum
Minimum
1
RUN SPEED
100
0
2
RUN TIMES
100
0
3
LOAD DEFAULT
Restore the factory parameter
4. UP: increase parameter key/preset parameter.
5. DOWN: decrease parameter/preset parameter.
6. AUTO PROGRAM mode is repeatedly cycle running part or all of 6-31 patterns run,you
can set whether participating in repeated cycle of operation or not in RUN TIMES.
7. RUN TIMES: compiling the run times of the pattern under 33 AUTO PROGRAM, if the
run times is 0, you can skip the pattern,that means not running the pattern.
8. Preset parameter: each form has independent factory preset parameter, which is kept
in controller separate. LOAD DEFAULT can recover the factory parameter of the form. If
under AUTO PROGRAM mode, using LOAD DEFAULT can unified recover the parameter
of all forms to factory parameter.
9. 32 ADJUST MODE is manual dimming, it can adjust the brightness of RGB 0-256 level
respectively.
10. 34 DMX512 MODE is controlling all patterns (the first address) and speed
（
the second
address).
