6
EN
1. Remove any packaging materials from the appliance.
2. Clean the grill rack and its accessories.
3. Fasten 4pcs of plastic foot on the back side of body. see pic. No.2 below.
4. Fill the body with water up to the ‘1.0L.’ marking
5. Insert the straight metal pipe through 2 holes of zinc plate and body on two sides.
6 Place the two rubber sockets onto the left &right sides of the straight metal pipe to avoid
the overheat. See pic.No.5 below
7. Fix heating element with body and zinc plate by M4x35 Screw. See picture no.8 below
8. Fix the grill rack on top.
9. Let the grill heat up for a moment without any food on the rack. This will reduce the smell
when first switching on a new grill (a slight smell and a little smoke may be emitted, ensure
sufficient ventilation)
1. Fix part A1 into A2 as above picture
2. Using Screw M5 to fix through A3&A3 together with the party did from above process,
then using A5 for fixing.
3. Finishing all assembling with all other 3pcs of stands as above process, finally completing
with fittings as above picture.
4. Fix up the finished BBQ unit as instruction ‘BBQ assembly” on top of above stand party
A8.See picture above.
5. Let the grill heat up for a moment without any food on the rack. This will reduce the smell
when first switching on a new grill (a slight smell and a little smoke may be emitted, ensure
sufficient ventilation).
•
Pour water into the base, make sure the water level is between Min-Max.
•
Immerse the aluminum tray into the water.
•
Until the aluminum tray sank under water.
•
Fill the grease tray with a little water, so it is easy to clean after use.
Water should be added in good time, while ensuring that it does not come into contact
with the heating element. Plug into a grounded outlet and turn the thermostat (No. 8)
at the highest setting. The red light comes on.
•
During the first use may be some smoke and smell created. This is normal for new heating
elements and will disappear after a short time.
•
Use the thermostat (No. 8) to the desired position between MIN and MAX. To sear meat
quickly select the highest setting, the MAX position. For the quiet thread of meat and other
dishes select a lower setting.
•
The thermostat regulates a constant temperature. During grilling the light comes on and
off, this is normal, the temperature will be constantly adjusted.
Attention!
The unit is very hot, do not touch. Move the appliance with the EN handles (No 4).
Always use tools for turning the food on the grill, to lay out and to take off.
BEFORE USING FOR THE FIRST TIME
STAND ASSEMBLY
USE