Strona 11 z 12
rev. 1.0.1
USER MANUAL
:
KIVOS KDB301
WIRELESS PEEPHOLE VIDEO DOOR PHONE
www.elmic.pl
,
Statement
This product maximum supports 1outdoor units to 3 Indoor monitor .The door phone has finished code match and can be
used directly.
If you need more pieces of indoor monitors or outdoor units, please contact your local distributors.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
All rights reserved.
Author instructions
KIVOS HK INDUSTRY LIMITED HONG KONG
Correction
ELMIC / PHU FENIKS POLAND
General faults and solutions
Fault
Cause(s)
Solution(s)
Can not start up
Neglected to press switch button
Press switch button
Lithium battery is not installed
Install lithium battery
Low battery
Charge up lithium battery
No connection to power adapter when battery
runs out
Connect to power adapter
Can not charge
Adapter connector doesn’t connect to charging
port of machine correctly
Reconnect correctly
Adapter doesn’t connect to 110V
--240V
alternating current
Plug into the socket to connect to
alternating current
Outdoor unit cannot call or
connect to Indoor monitor
Code match failed
Clear code, and re-match code
Image has noisy point or
flickers
Handset is placed near to TV player, microwave
oven, daylight lamp or mobile phone which
produces electromagnetic wave interference.
Keep handset far away from the
interference items
No signal for Indoor
monitor
Outdoor u
nit doesn’t connect to the power
Connect to the power
Distance between outdoor unit and Indoor
monitor is too far
Adjust to appropriate distance
Disturbed by magnetic field around
Keep handset far away from magnetic
field.