
Strona 8 z 17
rev. 1.0.1
USER MANUAL
:
KIVOS KD300
MULTIPURPOSE WIRELESS VIDEO DOOR PHONE INTERCOM SYSTEM
WITH MULTI MONITOR
www.elmic.pl
,
Installation Steps
1.
Drill a hole refer to the dimension, put the screw rubber plug in, then fix the rainproof cover on the wall by screws.
2.
Connect the charging line according to the wiring diagram(the hole for wire getting through suggested 16~30mm),
if charging line comes from indoor, lead the charging line pass through the hole, if charging line comes from
outdoor
,
lead the charging line pass through the bottom of rainproof cover and connect the line .
3.
Install rechargeable lithium battery
(
BP-6M
)
to outdoor unit, the unit starts up automatically.
4.
Put the top part of outdoor unit into the rainproof cover like the picture, push the bottom part, make sure its steady
and fix it from the bottom by screw, then fit on the screw cover.
Unlocking Setting
1.
Long press door bell until indicator blinks one time (approx 9 seconds, with a sound of “Beep”), loosen the key right
now, unlocking time is set as 1.8 seconds (Default unlock setting).
2.
Keep pressing until indicator blinks two times (approx 3seconds more, with two sound of “Beep”), loosen the key right
now, unlocking time is set as 4 seconds.
3.
Keep pressing until indicator blinks three times (approx 3 seconds more, with three sounds of “Beep”), loosen the key
right now, unlocking time is set as 8 seconds.
Attentions during Installation
1.
The outdoor photosensitive sensor should not be
hidden or blocked by other objects.
2.
Do not face outdoor unit to sunlight directly.
3.
Do not stick label on the speaker, otherwise, the
sound effect of doorbell will be affected.
4.
Install the connection line correctly, otherwise,
normal use shall be failure .