Front Panel
OR
1
2
3
1. IR sensor for remote control
2.LED status indicator
(blue - TV in standby mode,
response to the signal of the IR
remote control.
Inactive - TV is on or
no power supply)
3. Joystick control
RC (remote control)
Operating range of the remote control (remote
control) is up to 10 meters (in the absence of
interference or other signal obstacles)
To use the remote control, you first need to insert
the batteries as shown in the schematic picture
(the schematic image of the remote control may
differ from the real one). For correct operation of
the remote control, point it at the IR (infrared)
sensor of the TV. We recommend using only
alkaline batteries.
Do not mix new batteries with old ones. This can
cause overheating and battery leakage. Batteries
should not be exposed to direct sunlight, fire or
electric heaters. Do not insert non-rechargeable
batteries into the charger. Do not store batteries in
the remote for more than one month when not in
use.
The terms HDMI and HDMI High-definition Multimedia Interface and
logo HDMI are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Manufactured under license from DOLBY LABORATORIES. The DOLBY, DOLBY AUDIO and double D symbols are
trademarks of DOLBY LABORATORIES.
Installation
10
EN
