How to install
10
Make sure thoroughly for keeping pipe warmth of the Boiler.
The pipe may be exposed to the risk of a rupture due to freezing.
The exposed pipe should be wrapped with an insulator thicker than 25
mm to prevent the pipe from freezing
(50mm or more in a cold area).
Keep the floor level by making use of incombustible materials such as cement blocks
prior to installing the boiler.
Install the boiler at a location 50 mm above the floor.
When installing the boiler directly on the floor, the support of the boiler
may be corroded, thereby reducing the lifecycle of the boiler.
Use the outlet exclusion for the boiler.
Otherwise, fire may breakout.
Prevent the stovepipe from contact with combustible materials.
Otherwise, fire may breakout.
Finish the contact points with an incombustible insulation material
when installing the flue to prevent fire.
Drainage of boiler
If the capacity of the boiler is deficient for the heating area, the safety
valve may open often. Install a nitrogen tank suitable for the capacity.
(Overflow)
Connect hoses from the safety valve and the air vent to the sewage
pipe on the floor to drain water.
Install the boiler in a boiler room, if any.
Install the boiler in a boiler room if possible to prevent exhaust gas from
being introduced into the living room.
Do not install the boiler in a bathroom or a space without a vent. Lack of
oxygen causes incomplete combustion.
Never install the boiler in an outdoor environment so as to prevent a
rupture due to freezing.
АьїлєёАП·ЇЅЗ
WARNING