With the XDock Qi in any mode, press Alarm 1 (4) or Alarm 2 (5) once. The Alarm 1 (4) or
Alarm 2 (5) icons respectively will disappear from the screen.
Adjusting the screen brightness
With the XDock Qi in any mode, press Light brightness (7) to cycle through (Off, High brightness,
Medium brightness and Low brightness).
Sleep timer
If you want the XDock Qi to switch off after a set time, follow the below instructions. This is best
used when falling asleep to the radio.
With the XDock Qi in any mode, press Sleep/snooze (8) to cycle through (15 minutes, 30 minutes, 45
minutes, 60 minutes and off).
Playing music
Pairing the XDock Qi via Bluetooth
1.
Press the Standby/Mode button (6) to cycle through the input selection to Bluetooth mode
(c)
2.
The XDock Qi will automatically enter pairing mode, indicated by the flashing Bluetooth icon
(c)
3.
Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
4.
Select ‘KS XDOCK QI’. If asked for a passcode, enter ‘0000’, and the device will pair
5.
An audio tone will sound to confirm pairing and the Bluetooth icon (c) will stop flashing
6.
Audio volume can be controlled using (3) and Volume – (2)
7.
Audio playback can be paused using the Play/pause button (1) and skipped using long press
Next track (3) or Previous track (2)
Re-pairing or pairing new devices
1.
Turn Bluetooth connectivity off on any previously paired devices
2.
Follow instructions 3 – 7 of ‘Pairing the XDock Qi via Bluetooth’ section
Note:
If a previously paired device is not present within the wireless connectivity range then the
speaker will re-enter pairing mode.
Note:
The XDock Qi’s internal amplifier will go to standby after 15 minutes of no music activity.
Aux mode
The aux input allows you to use most other smartphones/tablets/MP3 players etc. with the XDock
Qi.
To use the aux input:
1. Plug one end of an aux cable into the Aux-in port (10)
2. Plug the other end of the aux cable into your device
3. If the XDock Qi is in standby mode, press Standby/Mode (6) to cycle through the input selection to
Aux mode
4. Once Aux mode is selected, music will then play through the XDock Qi
5. The volume can be adjusted on both your device and the XDock Qi
