23
Descaling
Minerals, lime and calcium found in hard-water areas can accumulate and affect
the operation of your Programmable Temperature Kettle. Depending on water
conditions and frequency of use, your Kettle should be cleaned to remove scale
when performance diminishes.
1. Before cleaning your Programmable Temperature Kettle, make sure the power
base is unplugged and the Kettle is cool.
2. Fill the Programmable Temperature Kettle with 1 part white vinegar
or lemon juice to 3 parts cold water.
3. Allow the filled Programmable Temperature Kettle to stand for 1 hour;
then bring the Kettle contents to a BOIL.
4. Empty the Programmable Temperature Kettle, rinse thoroughly. BOIL clean
water 2 or 3 times using cold water to rinse any residual acid taste.
5. After descaling, rinse the Programmable Temperature Kettle thoroughly
then re-fill with fresh cold water.
6. Unplug the Programmable Temperature Kettle power base from
the wall outlet.
WARNING:
• To avoid personal injury, always use extreme caution when handling
hot water.
• Do not touch any Programmable Temperature Kettle surface during
and after use.
• Never lift the Kettle lid when boiling water.
Summary of Contents for Beautiful
