Using your rotisserie (optional accessory)
21
A rotisserie kit can be purchased as an accessory for the grill.
IMPORTANT:
you can only use a KitchenAid Rotisserie
A
Rotisserie motor
B
Spit rod
C
Rotisserie fork
D
Rotisserie burner
For best cooking results, do not use main grill burners when using the rotisserie.
The rotisserie system is designed to cook food from the rear using intense, searing infrared heat.
NOTE:
To avoid product damage when not using the rotisserie, remove the motor and 500 mAmp
transformer assembly and store indoors. Remove the spit rod and forks. Store out of reach of children.
To Use:
1. Remove the warming rack.
2. Mount the rotisserie motor on the grill's mounting
bracket. Position it securely into support bracket
slots.
A
Rotisserie motor
B
Power cord
3. To load the spit rod, slide one of the rotisserie forks onto the spit rod with prongs facing inward.
4. Push spit rod through the center of the food, then slide second rotisserie fork into position.
5. Center the food and rotisserie forks on spit the rod and tighten the wing nuts on the rotisserie forks. If
necessary, secure loose food portions with butcher's string only.
6. Once the food is positioned on the spit rod, place
the pointed end of the rod through the hole in the
left side of the grill and into the rotisserie motor,
then lower the notched end of the spit rod onto
the support bracket on the opposite side.
A
Pointed end of spit rod
B
Notched end of spit rod
7. Check that food is centered with the rotisserie burner. If not, loosen wing nuts, reposition food and
retighten the wing nuts.
8. Plug into a grounded 3 prong outdoor socket (input 230V/240V and output 12V).
9. Turn on the rotisserie motor and light the rotisserie burner. See the following "Lighting the Rotisserie
Burner" section.
Lighting the Rotisserie Burner
1. Do not lean over the grill.
2. Push in and turn the control knob to "electric
ignition
" & "maximum flame
". You will see
the igniter glow.
3. When the rotisserie burner lights, continue to hold
the knob in for another 10 seconds, then release
the knob and burner will stay lit.
IMPORTANT:
If the rotisserie burner does not light immediately, turn the burner knob to OFF
and
wait 5 minutes before re-lighting.
A
B
C
D
A
B
A
B
