ENGLISH
7
USING THE BLENDER
Using the Tamper:
Remove the ingredient-
measuring cap only. Stir or press contents
down towards the blade. When finished,
replace the ingredient-measuring cap
before resuming blending.
5
The Pulse function may also be used on its
own as a separate blending function while
the Blender is in Standby mode.
6
After blending, flip the START/STOP
toggle switch up or down to stop. Unplug
the Blender before removing blender jar.
7
NOTE:
Allow the Blender to come to a
complete stop before removing the lid and
pouring your blended ingredients.
NOTE:
To avoid damaging the Blender, do not immerse the blender base or cord in
water. To avoid scratching, do not use abrasive cleansers or scouring pads.
CARE AND CLEANING
Empty the blender jar. Fill jar with 24 oz.
of hot water and add 3-4 drops of liquid
dishwashing detergent. Place the lid on the
blender jar, and make sure the blender jar
is fully in place on the blender base.
1
Rotate the control dial to Max. Flip the
START/STOP toggle switch up or down to
start. Run the Blender for 35 seconds. Flip
the START/STOP toggle switch up or down
to stop. When the blade stops spinning,
pour out the soapy water, and rinse the
blender jar with warm water.
3
