4-13
8.
Carefully lift the left side of the foam pad at
the top of the chassis, and fold it back
under the right chassis bracket.
9.
Remove the screw from the top of the high
voltage capacitor and cooling fan motor
mounting bracket.
Right Chassis
Bracket
Bracket Top
Screw
Foam Pad
10. Disconnect the three wire connectors from
the high voltage capacitor terminals.
12.
To remove the high voltage capacitor,
remove the mounting screw from the ca-
pacitor bracket, and remove the capacitor.
13.
To remove the high voltage diode:
a) Remove the mounting screw from the
capacitor bracket.
b) Disconnect the diode wire from the
magnetron terminal and remove the
diode.
11. Unhook the top and bottom of the mount-
ing bracket for the high voltage capacitor
& diode, and the cooling fan motor from
the unit, and pull it out just far enough to
access the capacitor bracket mounting
screw.
High Voltage Capacitor Wires
To HV Transformer
To Magnetron
High Voltage Diode
Capacitor Bracket Screw
High Voltage Capacitor
High Voltage
Diode Wire (On
Magnetron)
Continued on the next page.
Summary of Contents for KOMS155MBL
Page 1: ...TECHNICAL EDUCATION KAC 36 JOB AID 4317340 OVER THE COUNTER MICROWAVE OVEN Model KOMS155MBL ...
Page 18: ...2 2 NOTES ...
Page 42: ...4 20 NOTES ...
Page 60: ......
