5
INSTALLATION INSTRUCTIONS
Prepare Location
1.
Decide on the final location for the cooktop.
NOTE:
Countertop must be 1
3
⁄
16
" (3.0 cm) to 2" (5.1 cm)
thick.
2.
If necessary, make cutout in countertop before installing
cooktop. See “Location Requirements” section for more
information.
3.
Clean cutout of any remaining dust and debris.
Install Brackets
NOTE:
Cooktop Bracket Adhesive Kit Part Number W10310006
is required for installing the cooktop into a marble countertop.
See the “Assistance or Service” section of the Use and Care
Guide for information on ordering.
To Install Brackets into Marble Countertop
:
1.
Clean the brackets and cooktop cutout of any dust and
debris.
2.
Measure the center line of the vertical sides of the cooktop
cutout.
3.
Apply the adhesive provided in the kit to the back side of the
brackets.
4.
Position brackets in the center of the vertical centerline and
align the upper edge of the brackets so that they are flush
with the countertop.
5.
Push the brackets firmly onto each side of the cooktop
cutout and wait 1 hour for adhesive to dry.
To Install Brackets into Wood Countertop:
1.
Measure the center line of the vertical sides of the cooktop
cutout.
2.
Position brackets in the center of the vertical centerline and
align the upper edge of the brackets so that they are flush
with the countertop.
3.
Attach the brackets in the cutout with the screws provided.
Center line
1 h
Center line
A. Bracket
B. Screw
A
B
05-Sep-2019 13:08:05 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
