23
Adjusting oven temperature
Although your new oven is properly adjusted
to provide accurate temperatures, it may
cook faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the baking/
roasting results, you can change the offset
temperature by following the steps below.
The control will “remember” the selected
offset even after the power has been inter-
rupted or lost.
1. Choose Bake setting.
PRESS
and hold
for 4 seconds
Release the Bake pad when a number
appears in the temperature display and
you hear a tone.
2. Set new offset temperature.
PRESS
Each time you press the Bake pad, the
displayed temperature will increase by
5°F. To decrease the temperature,
hold down the Bake pad until the
display goes past 35°F. At that point
the display will return to 0 and will then
decrease 5°F for every time you press
the Bake pad. You can set the offset
temperature adjustment as low as -35°F
or as high as +35°F. (To determine the
amount of adjustment needed, see the
chart on page 24.)
3. Enter the adjustment.
PRESS
NOTE:
Do not measure oven temperature
with a thermometer. Opening the oven door
will lower the oven temperature and give you
an inaccurate reading. Also, the thermom-
eter temperature reading will change as your
oven cycles.
U
sing and Caring for
Y
our
O
ven
DELAY
CLEAN
DEHYD
TIMED
LOCKED
ROTIS
START?
MIN
START STOP TIME
SEC
MIN
HR
CLEAN
ON
Adjustment 5°F cooler:
DELAY
CLEAN
DEHYD
TIMED
LOCKED
ROTIS
START?
MIN
START STOP TIMER
SEC
MIN
HR
CLEAN
ON
Example:
YOU SEE
“0” (the setting shown) is set at
the factory.
Example:
YOU SEE
BAKE
BAKE
START
ENTER
MIN
START STOP
SEC
MIN
HR
CLEAN
Example:
YOU SEE
(time of day)