![background image](http://html.mh-extra.com/html/kitchenaid/kers205tbl-architectii-electric-range/kers205tbl-architectii-electric-range_installation-instructions-manual_198199013.webp)
13
If range does not operate, check the following:
■
Household fuse is intact and tight; or circuit breaker has not
tripped.
■
Range is plugged into an outlet.
■
Electrical supply is connected.
■
See “Troubleshooting” in the Use and Care Guide.
When the range has been on for 5 minutes, check for heat. If
range is cold, turn off the range and contact a qualified
technician.
Moving the Range
When moving range, slide range onto cardboard or hardboard to
avoid damaging the floor covering.
If removing the range is necessary for cleaning or maintenance:
For power supply cord-connected ranges:
1.
Slide range forward.
2.
Unplug the power supply cord.
3.
Complete cleaning or maintenance.
4.
Plug in power supply cord.
5.
To check that anti-tip bracket is installed, use a flashlight and
look underneath the bottom of the range:
■
Look for the anti-tip bracket securely attached to floor or
wall.
■
Slide range back so rear range foot is under anti-tip
bracket.
6.
Check that range is level.
For direct-wired ranges:
1.
Disconnect power.
2.
Slide range forward.
3.
Complete cleaning or maintenance.
4.
To check that anti-tip bracket is installed, use a flashlight and
look underneath the bottom of the range:
■
Look for the anti-tip bracket securely attached to floor or
wall.
■
Slide range back so rear range foot is under anti-tip
bracket.
5.
Check that range is level.
6.
Reconnect power.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death
or serious burns to children and adults.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.