5
Use for rinsing dishes, glasses, and silverware that will not be
washed right away.
Do not use detergent.
All soil levels
17
20
2.4 (9.0)
CYCLES
SOIL LEVEL
WASH TIME* (MINS.)
W/O OPTIONS
WATER
USAGE
GALLONS
(LITERS)
TYPICAL
MAX
OPTIONS
CAN BE
SELECTED
WITH
WHAT IT DOES
ADDED TIME TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
TYPICAL
MAX
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn the
Heat Dry option off for an air dry.
Available
with any
cycle except
Rinse Only
Activates the heating
element at the end of
the wash cycle to
speed drying times.
Heat Dry defaults to
ON when any cycle
is selected except for
Rinse Only.
52
52
0
(On some models) Lower jets, located
behind the lower rack, spray to clean tough,
baked-on food soil from pans, casseroles,
etc. They eliminate the need for soaking and
scrubbing dishes with dirty, baked-on food.
The upper rack has two spray zones in the
front corners to reach into deeper or oddly
shaped items.
Tough
Normal
ProWash™
Activates the
ProScrub
®
spray jets
to provide intensified
cleaning power to
specific wash areas.
53
73
0 - 3.0
(0 - 11.2)
Raises the main wash temperature to
improve cleaning for loads containing tough,
baked-on food.
Tough
Normal
ProWash™
Raises the main
wash temperate
from 105°F (41°C) to
either 130°F (55C°)
or 140°F (60C°).
42
60
0 - 3.0
(0 - 11.2)
Sanitizes dishes and glassware in
accordance with NSF International NSF/
ANSI Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for licensed
food establishments. Only sanitizing cycles
have been designed to meet the
requirements of the NSF/ANSI 184
performance standard for soil removal and
for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on a
NSF/ANSI 184 certified dishwasher meet the
NSF/ANSI 184 performance standard for soil
removal and for sanitization efficacy.
The Sani indicator glows at the end of the
cycle if the Sani Rinse option was
successfully completed. If the indicator does
not activate, it is probably due to the cycle
being interrupted.
Tough
Normal
Increases the main
wash temperature
from 105°F (41°C) to
140°F (60°C) and
the final rinse from
140°F (60°C) to
155°F (68°C).
53
73
0 - 3.0
(0 - 11.2)
Or on some
models
Runs the dishwasher at a later time or during
off-peak electrical hours. Select a wash cycle
and options. Press the Delay button. Press
START/RESUME. Close the door firmly.
NOTE:
Anytime the door is opened (such as,
to add a dish), the Start/Resume button must
be pressed again to resume the delay
countdown.
Available
with any
cycle
Delays the start of a
cycle to the
specified time
.
240
480
0
