KitchenAid KCM0801, Instructions Manual

Page: 8 / 44

8
OPERATING THE COFFEE BREWER ASSEMBLING THE COFFEE BREWER
Before first use
Before using your Coffee Brewer for the first time, wash the brew basket and carafe
in hot, soapy water, then rinse with clean water and dry.
Do not use abrasive cleaners or scouring pads.
NOTE: These parts can also be washed in the top rack of the dishwasher.
Preparing the Coffee Brewer for use
1
Plug the Coffee Brewer into a 3-prong
grounded outlet. If desired, wrap excess
cord around the cord holder on the back
of the Coffee Brewer.
2
Slide the water tank lid back, and fill
the water tank with fresh, filtered water
to the desired cup level as indicated on
the water tank view. Because of the
design of this Coffee Brewer, it may take
a moment for the water to enter the
place in the tank where you can view the
water level. Close the water tank lid.
NOTE: If the water in the tank has been
sitting for awhile and you wish to start
fresh, press the BREW button (without
coffee in the brew basket). This will cycle
through any stale water in the tank.
W10777391B_ENv02.indd 8 5/27/15 10:04 AM