background image

3

This induction cooktop generates and uses ISM frequency energy that heats cookware by using an electromagnetic field. It has been 

tested and complies with Part 18 of the FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements to minimize 

interference with other devices in residential installation. 
This induction cooktop may cause interference with television or radio reception. If interference occurs, the user should try to correct the 

interference by: 

Relocating the receiving antenna of the radio or television. 
Increasing the distance between the cooktop and the receiver. 
Connecting the receiver into a different outlet. 

It is the user’s responsibility to correct any interference. 

NOTE:

 People with a pacemaker or similar medical device should use care when standing near this induction cooktop while it is on. The 

electromagnetic field may affect the pacemaker or similar device. Consult your doctor, or the manufacturer of the pacemaker or similar 

medical device for additional information about its effects with electromagnetic fields of the induction cooktop.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: 

To reduce the risk of fire, electrical shock, 

injury to persons, or damage when using the cooktop, follow 

basic precautions, including the following:

■  

CAUTION: 

Do not store items of interest to children in 

cabinets above a cooktop – Children climbing on the 

cooktop to reach items could be seriously injured.

■  

Proper Installation – Be sure your cooktop is properly 

installed and grounded by a qualified technician.

■  

Never Use Your Cooktop for Warming or Heating the 

Room.

■  

Do Not Leave Children Alone – Children should not be left 

alone or unattended in area where cooktop is in use. They 

should never be allowed to sit or stand on any part of the 

cooktop.

■  

Wear Proper Apparel – Loose-fitting or hanging garments 

should never be worn while using the cooktop.

■  

User Servicing – Do not repair or replace any part of the 

cooktop unless specifically recommended in the manual. All 

other servicing should be referred to a qualified technician. 

■  

Storage on Cooktop – Flammable materials should not be 

stored near surface units.

■  

Do Not Use Water on Grease Fires – Smother fire or flame 

or use dry chemical or foam-type extinguisher.

■  

Use Only Dry Potholders – Moist or damp potholders on 

hot surfaces may result in burns from steam. Do not let 

potholder touch hot heating elements. Do not use a towel 

or other bulky cloth.

■  

DO NOT TOUCH SURFACE UNITS OR AREAS NEAR 

UNITS – Surface units may be hot even though they are 

dark in color. Areas near surface units may become hot 

enough to cause burns. During and after use, do not touch, 

or let clothing or other flammable materials contact surface 

units or areas near units until they have had sufficient time 

to cool. Among those areas are the cooktop and surfaces 

facing the cooktop.

■  

Use Proper Pan Size – This cooktop is equipped with one 

or more surface units of different size. Select utensils 

having flat bottoms large enough to cover the surface unit 

heating element. The use of undersized utensils will 

expose a portion of the heating element to direct contact 

and may result in ignition of clothing. Proper relationship of 

utensil to burner will also improve efficiency. 

■  

Never Leave Surface Units Unattended at High Heat 

Settings – Boilover causes smoking and greasy spillovers 

that may ignite.

■  

Glazed Cooking Utensils – Only certain types of glass, 

glass/ceramic, ceramic, earthenware, or other glazed 

utensils are suitable for cooktop service without breaking 

due to the sudden change in temperature.

■  

Utensil Handles Should Be Turned Inward and Not Extend 

Over Adjacent Surface Units – To reduce the risk of burns, 

ignition of flammable materials, and spillage due to 

unintentional contact with the utensil, the handle of a 

utensil should be positioned so that it is turned inward, and 

does not extend over adjacent surface units.

■  

Do Not Cook on Broken Cooktop – If cooktop should 

break, cleaning solutions and spillovers may penetrate the 

broken cooktop and create a risk of electric shock. Contact 

a qualified technician immediately.

■  

Clean Cooktop With Caution – If a wet sponge or cloth is 

used to wipe spills on a hot cooking area, be careful to 

avoid steam burn. Some cleaners can produce noxious 

fumes if applied to a hot surface.

For units with ventilating hood –

■  

Clean Ventilating Hoods Frequently – Grease should not 

be allowed to accumulate on hood or filter.

■  

When flaming foods under the hood, turn the fan on.

For units with coil elements –

■  

Make Sure Reflector Pans or Drip Bowls Are in 

Place – Absence of these pans or bowls during 

cooking may subject wiring or components 

underneath to damage.

■  

Protective Liners – Do not use aluminum foil to line surface 

unit drip bowls, except as suggested in the manual. 

Improper installation of these liners may result in a risk of 

electric shock, or fire.

■  

Do Not Soak Removable Heating Elements - Heating 

elements should never be immersed in water.

■  

Do not place metallic objects such as knives, forks, spoons 

and lids on the cooktop surface since they can get hot.

Summary of Contents for KCIG950JBL





































Reviews: