background image

27

To Delay Start Self-Clean:

Before delay starting Self-Clean, make sure the clock is set to the 
correct time of day. See “Clock/Timer Display” section. Also, 
make sure the door is closed completely or it will not lock and the 
cycle will not begin.

1. Press SELF CLEAN. To set a clean time other than 

3

 

hours 30 minutes, press SELF CLEAN until the desired 

time is reached. The clean time can be set between 
2 hours 30 minutes

 

and

 

4 hours 30 minutes.

2. Press STOP TIME.

3. Press the number pads to enter the time of day to stop.

4. Press START. 

The start time is automatically calculated and displayed along 
with the clean time and stop time.  “DELAY” will also appear 
on the display. 

When the start time is reached, “LOCKING DOOR” will 
appear in the display. When the door locks, self-clean will 
start and “OVEN IS CLEANING” then, “DOOR LOCKED” will 
appear in the display.

The door will not unlock until the oven cools.

When the cycle is complete and the oven cools, “SELF 
CLEAN COMPLETE” will appear on the oven display.

Press OFF to clear the oven display.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products.

Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)

Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire appliance is cool. These spills 
may affect the finish.

Cleaning Method:

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad:

Gently clean around the model and serial number plate 
because scrubbing may remove numbers.

STAINLESS STEEL (on some models)

To avoid damage to stainless steel, do not use soap-filled 
scouring pads, abrasive cleaners, Cooktop Polishing Creme, 
steel-wool pads, gritty washcloths or abrasive paper towels. 

Rub in direction of grain to avoid damaging.

Cleaning Method:

KitchenAid

®

 Stainless Steel Cleaner and Polish

(sample included):

See “Assistance or Service” section to order.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

CERAMIC GLASS

To avoid damage to ceramic glass, do not use steel wool, 
abrasive powder cleansers, chlorine bleach, rust remover or 
ammonia.

Always wipe with a clean, wet cloth or sponge and dry thoroughly 
to avoid streaking and staining.

Cooktop Cleaner is recommended regularly to help avoid 
scratches, pitting and abrasions and to condition the cooktop, 
and can be ordered as an accessory. See “Assistance or Service” 
to order.

A Cooktop Scraper is also recommended for stubborn soils, and 
can be ordered as an accessory. See “Assistance or Service” to 
order. The Cooktop Scraper uses razor blades. Store razor 
blades out of the reach of children.

Cleaning Method:

Light to moderate soil

Paper towels or clean damp sponge

Sugary spills (jellies, candy, syrup)

Cooktop Scraper:

Scrape sugary spills while the cooktop is still warm. You may 
want to wear oven mitts while doing so.

Cooktop Polishing Creme and clean damp paper towel:

Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears.

Heavy soil, dark streaks, specks and discoloration

Cooktop Polishing Creme or nonabrasive cleanser:

Rub product into soil with a damp paper towel or soft cloth. 
Continue rubbing until white film disappears.

Burned-on soil

Cooktop Polishing Creme and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as 
flat as possible on surface and scrape. Repeat for stubborn 
spots. Polish entire cooktop with creme and paper towel.

Metal marks from aluminum and copper

Cooktop Polishing Creme:

Clean as soon as cooktop has cooled down. Rub creme into 
surface with a damp paper towel or soft cloth. Continue 
rubbing until white film disappears. The marks will not totally 
disappear but after many cleanings become less noticeable.

Tiny scratches and abrasions

Cooktop Polishing Creme:

Rub creme into surface with a damp paper towel or soft 
cloth. Continue rubbing until white film disappears. Scratches 
and abrasions do not affect cooking performance and after 
many cleanings become less noticeable.

Summary of Contents for ARCHITECT II KERS807

































Reviews: