ENGLISH
USING THE COMMERCIAL BLENDER
|
7
USING THE COMMERCIAL BLENDER
Before first use
Before using your Blender for the first
time, wipe the blender base with a warm
damp cloth, then wipe clean with a damp
cloth. Dry with a soft cloth. Wash the
blender jar, lid, and ingredient cup in warm,
sudsy water (see the “Care and cleaning”
section). Rinse parts and wipe dry.
1
Before using the Blender, be sure the
countertop beneath the Blender and
surrounding areas are dry and clean.
Be sure the power switch on the back
of the blender base is in the Off (
O
)
position and the cord is also fully
plugged into the back of the Blender.
Then, plug the Blender into
an earthed.
2
The main power switch is on the
back of the blender base. Flip the
POWER switch to the On (
I
) position.
The status indicator light above the
Start toggle button will begin to
flash, indicating that the Blender is in
Standby mode. The Blender is now
ready to operate.
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
PREPARING THE COMMERCIAL BLENDER FOR USE
NOTE:
The cord cleat is not to be used
as a handle; the cord cleat is designed to
wrap the power cord around it for
storage only.
Summary of Contents for 9KSBC2F1
Page 1: ...9KSBC2F1 ...
