20
| TROUBLESHOOTING
TROUBLESHOOTING
No indicator lights are lit.
Check to see if the Blender is plugged
into an earthed outlet. If it is, press
POWER ( ); then unplug the Blender.
Plug it back in to the same outlet, and
Press POWER ( ). If the Blender still does
not work, check the fuse or circuit breaker
on the electrical circuit the Blender is
connected to and make sure the circuit
is closed.
All indicator lights are flashing at the
same time.
If the Blender is plugged in, but nothing
happens when Power ( ) is pressed,
and all indicator lights are flashing, the
motor rotor may be locked. Press POWER
( ); then unplug the Blender. Plug it back
in; then press POWER ( ) and select the
desired speed.
IMPORTANT:
The Blender will not operate at any speed unless the Power ( )
button is pressed first.
Blender does not operate when a setting is selected
One indicator light is flashing alternately.
If the Blender is plugged in, but will not start
and one light is flashing alternately from all
the other indicator lights, the Blender may
have a stuck key. Press POWER ( ) to turn
off the Blender; then unplug the Blender. Plug
the Blender back in and press POWER ( )
to turn back on to reset the stuck key.
W11091684A_01_EN.indd 20
4/26/17 12:31 PM
