background image

7

English

ASSEMBLING THE ESPRESSO MACHINE

ASSEMBLING THE ESPRESSO MACHINE

OPERATING THE ESPRESSO MACHINE

IMPORTANT: Distilled water or mineral water can damage the Espresso Machine� Do 

not use either to brew espresso.

2

Slide the water reservoir left or right to 

expose the top, and fill with fresh cold 

water to the “max fill” line.

Insert the end of the electrical cord without 

prongs into the cord receptacle in the back of 

the Espresso Machine� Plug the other end of 

the cord into a grounded outlet�

Rinsing and filling the boilers

Connecting the Espresso Machine

1

Remove the reservoir and rinse with 

fresh cold water, empty, and place back 

onto the Espresso Machine�

The boilers need to be filled and rinsed before the Espresso Machine is used for the first time.  

The boilers will also need to be filled when:
-  the Espresso Machine is not used for a prolonged period

-  the water reservoir runs dry during use (this can damage the Espresso Machine)

-  multiple beverages are steamed without brewing espresso or dispensing hot water

W10699685A_ENv3.indd   7

6/30/14   4:08 PM

Summary of Contents for 5KES2102A

































Reviews: