ENGLISH
11
IMPORTANT:
To avoid damage, never wash or immerse the main body of Burr Grinder,
burrs, or power cord in water, or place in the dishwasher.
The Top hopper, Top hopper lid, Bottom
hopper, Bottom hopper lid, Grounds catcher
tray, and Portafilter holder can be cleaned
with warm, soapy water, then rinse with clean
water and dry with clean soft cloth.
1
Wipe clean the main body of Burr Grinder
with a soft, damp cloth. Dry thoroughly.
2
CARE AND CLEANING
TROUBLESHOOTING GUIDE
Problem
Solution
The Burr Grinder display
is not illuminated.
Your Burr Grinder might be in stand by mode. Press any
button or turn any knob to wake up the Burr Grinder.
The Burr Grinder does
not turn start.
Check if the Burr Grinder is securely plugged into an
earthed outlet.
If you have a circuit breaker box, make sure the circuit is
closed.
If the Burr Grinder shows 3
dashes (---) on display.
It indicates that the Top hopper is not locked in place.
See product assembly instructions for proper installation.
If the Burr Grinder does not turn
On and display shows “Er2”.
Your Burr Grinder is in a motor overload protection mode.
Unplug the Burr Grinder, clean the burrs, reassemble the
machine and securely plug into an earthed outlet.
If the Burr Grinder does not turn
On and display shows “Er3”.
Your Burr Grinder is in protection mode. Unplug the Burr
Grinder and allow it to cool for 10 minutes before turning
it back on.
If Coffee is not coming out from
the grind outlet.
Ensure fresh coffee beans are in the Top hopper.
If the Burr Grinder is operating
normally, but stops abruptly.
Stop the Burr Grinder. A coffee bean, may have jammed
the burrs. Refer to “Care and Cleaning” section for details
on cleaning the burrs.
The automatic dosing quantity is
not to your liking.
Doses of coffee are programmable refer to the
programming section for reference.
If the problem cannot be
corrected.
See the “Terms of KitchenAid Guarantee (“Guarantee”)”
sections. Do not return the Burr Grinder to the retailer –
retailers do not provide service.
NOTE:
Any other servicing should be performed by an
authorised service representative.
W11331491C_01_EN.indd 11
W11331491C_01_EN.indd 11
1/8/2021 12:31:07 PM
1/8/2021 12:31:07 PM
