7
ENGLISH
INSTALLATION
6
LPG system
•
• Before connecting ensure that
the barbecue gas valves are off.
• The cylinder knob must be closed.
• Connect the hose (1) to the barbecue hose
fitting (6) and tighten with a hose clamp.
• Connect the other end of the rubber hose (1)
to the pressure regulator (3) with fixed setting
(30/37mbar) and tighten with a hose clamp
(2). Connect the other end of the pressure
regulator (3) to the cylinder (5) with a washer (4).
• After connection check for leaks using a soapy
water solution or by spraying on all joints.
If bubbles appear, this indicates that there is a gas
leak. If you suspect a leak or smell gas turn off the gas
supply IMMEDIATELY and follow the instructions in
paragraph “what to do if you suspect a gas leak”.
• Check that the gas hose is not touching the rear
panel of the barbecue or is close to the fume outlet.
NEVER TEST FOR GAS
LEAKS WITH A NAKED
FLAME!
Here you can see the standard kit
