6
ENGLISH
INSTALLATION
Our barbecues are designed to operate exclusively on
the gas fuel specified on the serial plate.
Installation must be done by qualified technicians in
compliance with current norms.
This appliance is certified for outdoor use.
The appliance must be positioned on a stable,
horizontal surface resistant to temperatures of at least
100°C, at a minimum distance of 3 cm from the surface,
or on an Kitchen Kamin trolley (open or cabinet type).
Any wall or furniture above, beside or behind the
barbecue must have at least 20 cm clearance from the
barbecue and be resistant to temperatures of 100°C .
If mounted on a trolley, the appliance can hold an LPG
cylinder (maximum capacity 10 kg)
The trolley installation instructions are contained in the
booklet accompanying the trolley.
The appliance is fitted with a pressure regulator with
a fixed setting of 30/37mbar for the Italian market, a
1m hose and 2 hose clamps for connection to the
BUTANE or PROPANE gas cylinder.
In case we supplies the kit for the country
DO NOT USE THE APPLIANCE WITHOUT THE
FIXED-SETTING PRESSURE REGULATOR
Pressure can be measured by connecting a pressure
gauge to the pressure inlet (A) after removing the
screw (B).
Please remember to replace the screw (B).
The gas supply hose must be replaced if damaged or
on the expiry date stamped on it.
LPG cylinder
The gas cylinder must be kept vertical and protected
from accidentally tipping over. If an Kitchen Kamin,
trolley is used, please follow the relevant instructions.
The gas cylinder must be shut off after every use.
