16
Error code
Problem
Solution
E0
There is no cookware on the
hob, or the cookware is not
suitable for use with the
induction hob.
Use suitable cookware when
using the hob (see section
titled "Suitable cookware").
E2
The temperature sensor
under the hob is defective, or
there has been a short circuit.
Disconnect the appliance
from the power supply and
contact our customer service
department.
E3
The appliance is being used
with a mains voltage that is
too high (> 270 V).
Check and make sure the
appliance is plugged into a
properly installed 220-240V,
50-60Hz power outlet.
E4
The appliance is being
supplied with too little mains
voltage (< 145 V).
Check and make sure the
appliance is plugged into a
properly installed 220-240V,
50-60Hz power outlet.
E5 or E6
The appliance has
overheated.
Disconnect the appliance
from the power supply and
remove the plug from the
power outlet. Wait until the
appliance has cooled down.
Now the hob should be
working properly again. If
the problem persists, contact
customer service and enter
the error code that is being
displayed.
