Maintenance
- 7 -
- 6 -
Temperature
Display
Temperature
Wind Speed
Dry
Care
Power
Time
Standard
Mode
Anion
Antibiosis
Air Blow
Heating
Natural Air
Setting
Mode
Current
Temperature
Power Level
Function
Elapsed
Time
Remaining
Time
After connecting to the power socket and switching on the air switch on the back,
short-press the power button to turn ON or OFF.
During drying/care mode, long-press the power button for 3 seconds to turn on/off
the infrared lamp.
Care Mode
Regular Cleaning
After turning on, press the button of care mode.
Default setting: 26℃/1 hour/ Level 2 wind/Anion/Near-infrared at working circuit of
8 minutes’on and 2 minutes’off.
Temperature setting
Click the button of temperature to set temperature.
Wind speed setting
Click the button of wind speed to set wind speed at 3 levels.
Heating time setting
Press the time button to set the heating time at 0.5/1/1.5/2 hours.
Waste Pan Cleaning
Unplug the power cord before cleaning.
Please use environment-friendly detergent to clean.
Clean the product after use; use the product after it totally dries up.
Please use soft cloth with mild detergent to clean the product.
-- Pull out the waste pan along the direction of arrow.
-- The condensate water during working will flow into the waste pan.
Note: The pet may excrete involuntary during drying. Please clean up the waste pan
timely in this situation, or it may cause product fault and stinky odor in the drying
room).
After turning on, press the button of standard mode/drying mode.
Default setting: 36℃/1 hour/ Level 2 wind/Anion/Near-infrared working circuit of 8
minutes’ on and 2 minutes’ off.
Temperature setting
Click the button of temperature to set temperature.
Wind speed setting
Click the button of wind speed to set wind speed at 3 levels.
Heating time setting
Press the time button to set the heating time at 0.5/1/1.5/2 hours.
Operation Panel
Turn on/off
Drying Mode
