2
3
LCD
SPECIFICATIONS
SAFETY CAUTION
Blade
Battery
REMAIN POW
RPM
ER
Left
Right
Motor speed display
3 level (5000RPM/5800RPM/6500RPM)
Battery percentage display
(1%-100%)
Hair
Clipper
Motor
Battery
Operating voltage: 3.7V
Centering material: anti-wear brass
2000mA high-performance environment-friendly battery
Charging time: about 3 hours
Adapter
Operating time with full charge: about 4 hours
Input: AC 100V – 240V 50/60Hz
Output: DC 5V---1000mA
Keep the clipper away from moisture; do not submerge in water or liquid.
1. Use this appliance for its intended purpose. Use only on clean, dry hair.
2. Close supervision is necessary when this appliance is by or near children.
3. Use only with accessories included in the package, or those recommended by
the manufacturer.
4. Avoid contact with the eye area. Avoid use near or on open wounds, damaged or
sensitive skin.
5. Except when charging, always unplug from the electrical socket after use.
6. Keep away from water and all liquids and any detergent agents.
7. Do not pull, twist or wrap the cord tightly. Pull on the plug (not the cord) to
remove from power receptacle.
8. Charging should be done in a safe environment (between 0 and 40
℃
); indoors
in a dry place.
9. The charger adaptor must be kept dry at all times.
1. The blade must be lubricated before and after each use. This will maintain good
condition and will extend its service life.
2. Nonstop usage for hours may cause overheating of blades, reducing the cutting
performance and shortening their life. Should the blades overheat, switch the unit off
for a few minutes to let it cool down; then lubricate the blades.
3. Hair must be clean and dry before cutting. Foreign matter hidden in the hair may
damage the blade edge.
4. Hair may gather inside the blade housing during use. Too much stored hair will
reduce the oscillating ability of the blades and cause malfunctioning. Always clean
away hair in the blade housing before and after each use.
5. Avoid impact of the blade with hard objects as this may cause damage to the
blade teeth.
1. Do not overcharge. It takes 3 hours to charge your trimmer. Charging over 36
hours may shorten the life of the battery.
2. The life of the battery will be shortened if the trimmer remains at less than full
charge for long periods. Charge unused clippers every 3 months to activate the
battery.
3. It is normal for the adapter and the internal parts to become warm when charging.
4. Please remove the battery safely and return it to the specified places when the
battery runs out. Never discard it casually.
Ceramic Blade with
Acute Angle
4-length Adjustable
Blade
2000mA High-
performance Battery
Work while charging is available (Please turn off the machine before charging)
After approximately 2hrs of constant use, the oil
indicator on the left side will light up and the alarm
will sound. On the right side the charging light will
flash when battery power is less than 10%.
10. Do not disassemble the product.
11. The product can only be cleaned by cloth with little water or mild soap solution.
12. It’s normal for the product to produce little heat during using or charging.
13. Use or store the trimmer only at room temperature(between 0 and 40
℃
). Avoid
direct sunlight, moisture or heated surfaces and environments.
14. Except for the purpose of charging, always switch off and unplug the adapter
from the wall socket after use.
15. Do not frequently use the clipper plugged without having recharged the battery,
as this may reduce the life of the battery.
Should the following situations occur, unplug and switch off immediately, and send
for examination or repair.
1. The blade, main unit, power cord or attachment comb is damaged.
2. The clipper or the adapter is dropped into water.
3. The clipper is switched off, but the charging indicator does not light up when
plugged into the power source.
The clipper and accessories must be checked regularly to prevent damage and
ensure good performance.
If damage is detected, do not put the device into operation.
