15
Further information and assistance is available at KiSS Technology’s website under End
User/Support/After-sales for DVD Player.
Address: www.kiss-technology.com
Resetting
To reset the settings of the DP-1100, press the following buttons on the remote control:
“Open”, “Clear”, “1”, “2”, “3”. KiSS Technology A/S reserves the right to change all
settings and specifications without notice.
Important safety information
• Read these instructions carefully and pay attention to all warnings and
guidelines.
• Do not overload electrical sockets or extension cables.
Overloading can result in fire or electric shock.
• Never insert objects into the DVD player’s cabinet door. They might
come into contact with dangerous voltage points or short-circuit
components, which can cause fire or electric shock.
• Do not spill liquids on the DVD player.
• If the DVD Player does not function normally, or if it emits
unusual sounds or odours, pull out the plug immediately and contact an
authorised
technician.
• Do not attempt to service the DVD player yourself. If you open or
dismantle the shielding, you expose yourself to dangerous voltage and
other hazards. All maintenance must be carried out by qualified service
technicians.
Environmental information
• The system is made of recyclable materials which can be reused if
disassembled by authorised personnel.
• Please follow local regulations for the disposal of packaging
materials, used batteries and discarded units.
Copyright
This product contains copyright technology which is protected pursuant to the patents
that are the property of Macrovision Corporation and other copyright holders. Any use of
this copyright technology must be approved by Macrovision Corporation. The technology
is intended for use in the home unless otherwise approved by Macrovision Corporation.
Breakdown and disassembly are prohibited.
Made under license from Dolby Laboratories. “Dolby” and the double “D” symbol are
trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
Warranty certificate
KiSS provides a twenty-four (24) month warranty from the date of purchase against
material and manufacturing defects. For defects covered by the warranty, the product must
be returned to the dealer that sold the product.
Terms of Warranty
1. The warranty is only valid on presentation of the original sales receipt,
and if the serial number on the product is fully legible.
2. The obligations of KiSS are limited either to repair or replacement
of defective components. The repair or replacement of defective
components is based on an assessment by KiSS. Exchange is only
possible if the repair cannot be performed.
3. Warranty repairs must be carried out by an authorised KiSS dealer, or
an authorised service centre. No remuneration is provided for repairs
performed by unauthorised workshops. Any repairs or damage to the
product caused by unauthorised intervention are not covered by this
warranty.
4. This product will not be considered as being defective, either in
materials or in manufacture, if adaptation to national, local, technical
or safety-related requirements is required in countries other than the
specific country for which the product was originally designed and
manufactured.
5. This warranty does not cover these types of adaptations, and no
remuneration will be offered for these types of adaptations or for any
consequential damages. The warranty does not cover the following:
a) Periodic inspection, maintenance and repair or replacement of parts
resulting from normal wear.
b) Costs connected to transport, disassembly or installation of the
product.
c) Misuse, including use for purposes other than was intended, or
faulty
installation.
d) Damage caused by lightning, water, fire, natural catastrophes,
war, insurrection, incorrect line voltage, insufficient ventilation
or other causes outside the control of KiSS.
6. This warranty applies to every legal owner of the product during the
warranty
period.
Packaging
If possible, use the original packing material for any shipping. Otherwise, repack the DP-
1100 using:
• A reinforced cardboard box, strong enough to carry the weight of the
product.
• At least 6 cm / 2.36 inches of shock-absorbing material around the
product.
• Non-abrasive, dust-free material for the other parts.
• Non-abrasive wrapping for the product. (Dust and dirt cover)
• Repack the product in such a way as to ensure that it cannot shift in
the box during transport.
• No other alternative will be accepted
Information we must receive before repairing the product:
Model name: KiSS DVD Player DP-1100
Serial no.:
Fault description (www.kiss-technology.com/rma):
Copy of the invoice or sales receipt
The dealer’s name, address and phone no.
Personal information: Name, address, post code/city, phone no. and e-mail address
(optional).
Your signature
Dealer’s stamp and signature
Date
For questions or problems with your product, KiSS provides an international customer
service. Telephone calls or e-mails can be addressed in English, French, German, Spanish,
Italian, Danish, Swedish and Norwegian
KiSS Technology A/S
Slotsmarken 10
DK-2970 Hørsholm
Denmark
Hotline (user support)
Monday to Friday 9.00-1800 (CET)
Tel: +45 45 17 00 07
[email protected]
www.kiss-technology.com
9
Support
- Some features and information in this manual may differ slightly from the product itself due to firmware versions and changes made after printing
- For the latest information, always refer to www.kiss-technology.com/faq for the FAQ and the latest online guides
