KisanKraft
®
Spark Ignition Internal
Combustion Piston Engines
for Agriculture
KK-PE4-103 / 163 /203
: +91.80. 22178200
Page 8 of 32
13.
Place the engine on flat (level) surface, tilting angle of the engine should not be
more than 20º, otherwise it will lead to fuel spilling out.
14.
Do not cover the engine so as to avoid fire occurrence.
15.
The muffler becomes very hot during and immediately after operation. Be careful
not to touch the muffler while it is hot. Let the engine cool down before storing
the engine indoor.
PRE-OPERATION CHECKS
A. Check the oil level
Lubricating oil:
Engine lubricant oil is a major factor affecting engine performance and service
life.
The use of the lubricating oil free of cleaning agent or the lubricating oil for the
two-stroke engine will shorten the life of the gasoline engine.
The operating temperature range recommended for the gasoline engine is -
5
℃
~40
℃
.
Use 4-stroke motor lubricant oil. 20W-40 is recommended in general, at all
temperature use. Other viscosities shown in the chart may be used when the
average temperature in your area is within the indicated range.
Ambient temperature
Before checking engine lubricant oil, place the engine on level surface
Turn out the oil filler cap and clean the dipstick with a clean cloth.
Insert the dipstick back into the oil filler hole without turning it in.
If oil level is below the lower mark of the dipstick, fill oil to the upper level of the
dipstick.
Reinstall the oil filler cap properly.
