KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-750RT
This warranty is null & void, if you fail to register the warranty with KisanKraft
by sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 26 of 36
There is oil leakage of
back cover on the main
shaft
O-ring on the main shaft
becomes useless
Change O-ring
φ
17×1.8
Oil seal on the main shaft
becomes useless
Change oil seal B25407
O-ring on the cover becomes
useless
Change O-ring
φ
46×1.8
There is oil leakage of
backshift shaft
Bolts behind the backshift shaft
become loose
Tighten bolts
O-ring on the backshift shaft
becomes ineffective
Change O-ring
φ
18×1.8
There is oil leakage of
backshift fork shaft
O-ring becomes useless
Change O-ring
φ
1.2×2.65
There is oil leakage of
clutch shift fork
O-ring becomes useless
Change O-ring
φ
1.2×2.65
There is oil leakage of
shift shaft
O-ring becomes useless
Change O-ring
φ
1.2×2.65
There is oil leakage of
flange
Bolts become loose
Tighten bolts
Steel gasket is damaged
Change
There is oil leakage of
case
There are hidden micro holes in
the case
Weld or paint to stop leakage
Ⅳ
Troubleshooting of running gear
Table 8
Phenomenon
Reason
Solution
Gear noise is too loud
Gear is heavily fretted or
repaired improperly
Readjust or change the gear
Gear is seized
Gear installation is incorrect
Reinstall
Overheat
Lube in the case is insufficient
Refuel lube according to the
requirement
Gear side clearance is too
narrow
Reinstall
Shaft windage is too narrow
Readjust
There is oil leakage of
gear box
Bolts become loose
Tighten
Seal gasket is damaged
Change
There is oil leakage of
outer section of crankshaft
Oil seal is damaged
Change oil seal B45628
