5
INSTALLATION
DRUM
INSTALLATION -
4
Cymbal/Tom Installation
1. Open Stand Legs
①
and make it stand firm.
2. Adjust Stand Arms
②
to suitable position and fasten wing nuts.
3. Insert drums according to the picture above, and fasten wing nuts on the stand.
Note:
The upside of tom has rubber band and white sensor spot under mesh.
①
②
1. Align holes in the sound module and the model mount then insert
screws and fasten it.
2. Insert rod of the model mount into the clamp, then tighten the wing nut.
Sound module Installation
Finalizing the Installation
After install all components, fine adjust the arm, clamps and rods to the
best position you desire.
Electronic Connection
Connect the trigger connector cable plug to the bottom of the sound
module, and then connect all cable heads according to their name tags.
①
①
②
②
